Polycom 3725-77601-001H manual Monitoring, Scheduled Provisioning of Selected Tandberg Endpoints

Polycom CMA System Operations Guide

To enable LifeSize endpoint management

1On the CMA system, go to Admin > Management and Security > Endpoint Management Settings.

2In the Default Passwords for LifeSize Endpoint Management section of the Endpoint Management Settings page, enable Use Default Passwords.

3Enter the Password for SSH User and confirm the password. Refer to the LifeSize system documentation for information on using SSH to connect to the endpoint, then enter the same SSH password here.

4Enter the Password for Web UI User and confirm the password. Refer to the LifeSize system documentation for information on using a web browser to connect to the endpoint, then enter the same web UI password here.

5Click Update.

Note

For the CMA system to successfully manage a LifeSize endpoint, SSH must be enabled on the endpoint. SSH can be enabled on the endpoint through device provisioning.

Monitoring

The CMA system can monitor select TANDBERG C Series, TANDBERG Edge, and LifeSize Team and Express endpoints, so when properly configured, the CMA system can provide online/offline status and alerts, display call status, and provide image support including near and far end images for these endpoints.

Scheduled Provisioning of Selected TANDBERG Endpoints

The following table identifies the fields that the CMA system can provision for TANDBERG 150, 990, 880, 770 MXP, and TANDBERG C Series endpoints.

See the appropriate TANDBERG product documentation for more information about these fields and their acceptable values. See “Scheduled Provisioning Operations” on page 186 for information on implementing scheduled provisioning of endpoints.

138 Polycom, Inc.