Polycom 3725-77601-001H manual Lpr, At the end After last participant quits All

Polycom CMA System Operations Guide

Field	Description
Encryption	Activate encryption for the conference
LPR	Activate lost packet recovery (LPR) for the conference.

	Note:
	LPR can be enabled for VSW conferences, but H.320 and
	SIP participants will not be able to connect.
Auto terminate	When selected (default), the conference automatically ends
	when the termination conditions are met:
	• Before first joins — No participant has connected to a
		conference during the n minutes after it started. Default
		idle time is 10 minutes.
	• At the end - After last participant quits — All the
		participants have disconnected from the conference
		and the conference is idle (empty) for the predefined
		time period. Default idle time is 1 minute.
	• At the end - When last participant remains — Only
		one participant is still connected to the conference for
		the predefined time period (excluding the recording link
		which is not considered a participant when this option is
		selected). This option should be selected when defining
		a profile that will be used for Gateway Calls and you
		want to ensure that the call is automatically terminated
		when only one participant is connected. Default idle
		time is 1 minute.
RMX Video Quality > People Video Definition
Video quality	Optimizes the video quality based on the amount of
	movement contained in the conference video. Possible
	values include:
	• Motion—Provides a higher frame rate without
		increased resolution.
	• Sharpness—Provides a higher video resolution and
		requires more system resources.
Max resolution (v7)	Depending on whether MPM+ or MPMx cards are installed,
	the possible values include:
	•	Auto
	•	CIF
	•	HD 1080
	•	HD 720
	•	SD

328 Polycom, Inc.