Polycom 3725-77601-001H manual Set the Virtual IP Address for the Redundant System

Polycom CMA System Operations Guide

fClick Shutdown to shut down the redundant server.

4When the redundant server has shutdown completely, on the primary server:

a Turn ON the primary server.

b Log into the server and go to Admin > Server Settings > Database.

c On the Database page, select the Use an external SQL Server database check box.

dEnter the Database Server IP address or DNS Name. e Enter the Database Server Port and click Update.

The system will guide you through formatting or upgrading the external database. The primary server restarts and comes online as the active server.

Set the Virtual IP Address for the Redundant System

To set the virtual IP address for the redundant system

1When the primary server has restarted completely, log into the primary CMA 5000 system server.

2Go to Admin > Server Settings > Redundant Configuration.

If the two CMA system servers are installed and configured correctly on the network, both servers are displayed in the table on the Redundant Configuration page.

3Enter the Virtual IP for the redundant system and click Submit. For information about this virtual IP address, see “Add or Remove a Polycom CMA System Custom Logo” on page 412.

Note

Set the virtual IP for the redundant server on the primary server only.

The primary server restarts and comes online as the active server.

4When the primary server has restarted completely, turn ON the redundant server and wait for it to boot completely.

436 Polycom, Inc.