Polycom CMA System Operations Guide

Add a Conference Template

To add a conference template

1Go to Admin > Conference Templates.

2On the Conference Templates list, click Add .

3Complete the General Info and MCU Settings sections of the Add Conference Template dialog box first. Your selection for MCU Settings affect your choices in the Video Settings section. For more information on the Add Conference Template dialog box, see “Conference Templates” on page 321.

4Complete the Video Settings and Conf Settings sections of the Add Conference Template dialog box.

5Click OK.

The new template appears in the Conference Template list.

Note

The CMA system does not validate the Conference Template settings. When you create a new conference template, you must make certain that the settings match the capabilities of the MCUs (MGC or RMX device) or endpoints.

Edit a Conference Template

To edit a conference template

1Go to Admin > Conference Templates.

2On the Conference Templates list, select the template of interest and click Edit .

3Edit the General Info, Video Settings, MCU Settings, and Conf Settings sections of the Edit Conference Template dialog box as required.

Note

If you change the conference template Speed setting and there are scheduled conferences using that template, all endpoints in the scheduled conferences are reset to whichever is less: the new template Speed or the maximum speed that the endpoint supports.

4Click OK.

338

Polycom, Inc.

Page 358
Image 358
Polycom 3725-77601-001H manual Add a Conference Template, Edit a Conference Template, Go to Admin Conference Templates