Polycom 3725-77601-001H manual Meeting password cannot include spaces

Polycom CMA System Operations Guide

Field	For the endpoint systems at the site being provisioned...
Meeting Password	Specify the password users must supply to join multipoint calls on this endpoint system if
	the call uses the internal multipoint option, rather than a bridge.
	This field can also be used to store a password required by another endpoint system that
	this system calls. If a password is stored in this field, you do not need to enter it at the
	time of the call; the endpoint system supplies it to the system that requires it. The
	meeting password cannot include spaces.
Enable Secure Mode	Specify whether to operate in secure mode (also known as security mode), which uses
	TLS, HTTPS, AES, digital signatures, and other security protocols, algorithms, and
	mechanisms. These protocols encrypt management communication over IP, preventing
	access by unauthorized users.
	When devices at a site are provisioned to operate in secure mode, the CMA system can
	only perform the dynamic management operations of automatic provisioning, automatic
	software update, and directory and presence services for the devices. The CMA system
	cannot perform monitoring or control operations for the devices.
	For more information, see the Administrator’s Guide for Polycom HDX Systems.
AES Encryption	Specify how to encrypt calls with other sites that support AES encryption.
	• Off—No encryption is used.
	• When Available—AES Encryption is used with any endpoint that supports it, even if
	the other endpoints in the call don’t support it.
	• Required for Video Calls Only—AES Encryption is used for all video endpoints in
	the call. Analog phone and voice over ISDN connections are allowed. Video
	endpoints must support AES Encryption to participate in the call.
	• Required for All Calls—AES Encryption is used for all video endpoints in the call.
	Analog phone and voice over ISDN connections are not allowed. All endpoints must.
	support AES Encryption to participate in the call.
Enable Web Access	Specify whether to allow remote access to the endpoint system by the web.

	Note
	The endpoint systems will restart if the remote access settings are changed. This setting
	does not deactivate the associated port, only the application. Use the Web Access Port
	setting to disable the port.
Enable Telnet Access	Specify whether to allow remote access to the system by Telnet.

	Note
	The endpoint systems will restart if the remote access settings are changed. This setting
	does not deactivate the associated port, only the application. Use the Web Access Port
	setting to disable the port.
Enable SNMP Access	Specify whether to allow remote access to the system by SNMP.

Note

The endpoint systems will restart if the remote access settings are changed. This setting does not deactivate the associated port, only the application. Use the Web Access Port setting to disable the port.

470 Polycom, Inc.