Polycom 3725-77601-001H manual 408

Polycom CMA System Operations Guide

Provision Group for Microsoft Lync or Microsoft Office Communications Server Integration

You have set up the Microsoft Lync or Office Communications Server group that needs to be provisioned to endpoints in each automatic provisioning profile. This controls the directory that endpoints can see.

Notes

•You cannot provision integration with a Microsoft Lync or Office Communications Server via scheduled provisioning.

•If the endpoint being provisioned is not capable of integration with a Microsoft Lync or Office Communications Server, the endpoint will ignore this settings.

•The group setting here applies to both Microsoft Lync and Office Communication Server.

To provision integration with Microsoft Lync or Office Communications Server

1Go to Admin > Provisioning Profiles > Automatic Provisioning Profiles.

2In the Automatic Provisioning Profiles page, select the profile of interest and click Edit.

3In the Provisioning Fields dialog box, click Microsoft Lync Settings and enter a Group Name.

The Group Name is the group set in the Microsoft Lync Server or Office

Communication Server.

4Click OK.

Provision SIP Settings for Microsoft Lync or Microsoft Office Communications Server Integration

By default, SIP is disabled in site provisioning. This procedure describes how to change existing site provisioning settings so that they provision integration with one of these unified communications servers.

To integrate with a Microsoft Lync or Office Communications Server, Polycom endpoints must have a user account on the Microsoft unified communications server infrastructure. To have the CMA system automatically provision a Polycom endpoint for this integration, the endpoint must use the same credentials (username and password) to access both the unified communications server and the CMA system. Only then can the CMA system automatically provision a calendaring service-enabled endpoint system.

408 Polycom, Inc.