Polycom 3725-77601-001H manual Automatic Software Update View

Endpoint Management Overview

Action	Use this action to...
Provision	Schedule provisioning for the selected endpoint(s).
Cancel Provision	Cancel a previously scheduled provisioning operation.
Clear Status	Change the status column for a endpoint to the Clear
	state.

You can perform these operations on multiple endpoints at the same time. To select multiple endpoints, hold the control key while you select the endpoints.

For information about these endpoint actions, see “Endpoint Provisioning Operations” on page 181.

Automatic Software Update View

Use the Automatic Software Update View, available from the Endpoint menu, to view the list of endpoints that have registered to the system for automatic software updates.

Endpoint List in the Automatic Software Update View

By default, the Endpoint list in the Automatic Software Update View displays all endpoints eligible for automatic software update. It has the following information.

	Field	Description
	Filter	Filter choices for this view include:
		• Type—Filters the list by endpoint type.
		• Name—Searches the list by the endpoint’s system
			name.
		• IP Address—Searches the endpoint list by IP
			address.
		• ISDN Video Number—Searches the endpoint list
			by ISDN video number.
		• Dial String— Searches the endpoint list by dial
			string (SIP, H.323, or ISDN).
		• Site—Searches the endpoint list by site location.
	Status	The status of the endpoint’s last software update.
		Possible values include:
		•	Success
		•	Failed
		•	Clear
	Name	The system name of the endpoint.
Polycom, Inc.			99