Polycom 3725-77601-001H manual Video Switching Mode, Auto layout option RMX Video Settings

Conference Setup Overview

Field	Description
Video Mode	Sets the video layout for the conference. The default is
	Video Switching Mode.	To change to a Continuous
	Presence layout or mode, click the switching icon and
	select a layout option.
	The video mode determines the initial layout on an
	endpoint’s display during a multipoint conference. This
	option requires an MCU.
	This option is not available for RMX devices if you select
	any of the following:
	• Auto layout option (RMX Video Settings)
	• Video switching option (RMX General Settings)
	• Telepresence mode is On (RMX Video Settings)

	Note
	Make sure you have defined video endpoint systems and
	boards so that they are available for selection in continuous
	presence layouts.
Presentation Mode	•	Select to enable Presentation Mode. In this mode, the
		system uses the selected layout to display all
		participants. When a participant’s speech exceeds a
		predefined time (30 seconds), the system identifies the
		participant as the lecturer and changes to Lecture
		Mode. The video mode for the other participant’s
		automatically changes to full screen, displaying the
		lecturer, while the lecturer’s endpoint displays
		participants in the video mode defined previously. When
		another participant starts talking, the system changes
		back to Presentation Mode and the conference returns
		to its predefined video layout.
	•	Clear this option do disable Presentation Mode. All
		participants see the conference in the video mode
		defined elsewhere.
	This option is not available if you select any of the following:
	•	Video switching option (RMX General Settings)
	•	Same layout option (RMX Video Settings)
	•	Telepresence mode is On (RMX Video Settings)

Notes

•RMX 1000 systems do not support Lecture Mode, Presentation Mode, or Lecture View Switching.

Polycom, Inc. 323