Polycom 3725-77601-001H manual Whitelist

Dial Plan Setup Operations

Field	For the endpoint systems at the site being provisioned...
Web Access Port	Specify the port to use when accessing the endpoint system’s web interface.
	If you change this from the default (port 80), specify a port number of 1025 or higher, and
	make sure the port is not already in use. You will need to include the port number with the
	IP address when you use the Polycom HDX web interface to access the system. This
	makes unauthorized access more difficult.

	Note
	The system restarts if you change the web access port.
Allow Video Display On	Specify whether to allow viewing of the room where the endpoint system is located, or
Web	video of calls in which the endpoint system participates, using the endpoint system’s web
	interface.

	Note
	This feature activates both near site and far site video displays in Web Director.
NTLM Version	Specify the NTLM version the endpoint system should use to authenticate.
Security Settings 2
Idle Session Timeout in	When sessions are enabled, Specify the number of minutes your system can be idle
Minues	before the session times out.
Lock Port after Failed	Specify the number of failed login attempts allowed before the system locks the account.
Logins	If set to Off, the system will not lock the user account due to failed login attempts.
	This selection controls local and web interface login attempts. For example, if you select
	3 here, a user who fails to log in properly twice on the web interface and twice on the
	local interface is locked out on the fourth attempt.
Failed Login Window in	Specify the amount of time that the account remains locked due to failed login attempts.
Hours
Port Lock Duration in	Specify the amount of time that the port remains locked due to failed login attempts.
Minutes
Maximum Peer	Specify how many links a certificate chain can have. The term peer certificate refers to
Certificate Chain Depth	any certificate sent by the far-end host to the HDX system when a network connection is
	being established between the two systems.
Verify Certificates for	Specify whether the endpoint requires certificate validation to acces the endpoint.
all Web Access
Whitelist
Enable Whitelist of IPs	When a whitelist is enabled, allows access to an endpoint’s web interface only by those
	systems with an IP address that matches a pattern using regular expression notation.

Polycom, Inc. 471