Polycom 3725-77601-001H manual Seconds

System Reports

Field	Description
System Information	Specifies the name of the selected endpoint.
Model	Specifies the model number of the selected
	endpoint.
IP Address	Specifies the IP address of the selected endpoint.
ISDN or V.35 Number	Specifies the ISDN number or V.35 number.
Serial Number	Specifies the serial number of the selected endpoint.

For each call from the selected endpoint, the CDR information includes the following data.

Field	Description
Start Date Time	Specifies the start date and time for the conference.
End Date Time	Specifies the end date for the report. This also
	defaults to the current date.
Call Duration	Specifies how long the call lasted in hours, minutes,
	and seconds.
Account Number	If Require Account Number to Dial is enabled on the
	system, the value entered by the user is displayed
	in this field.
Remote System Name	Specifies the endpoint to which the endpoint was
	connected for the call.
Call Number 1	Specifies the IP or ISDN numbers for the endpoints
Call Number 2	to which the endpoint was connected for the call.
Transport Type	The type of call — Either H.320 (ISDN), H.323 (IP),
	or SIP.
Call Rate	The bandwidth negotiated with the far site.
System Manufacturer	The name of the system manufacturer, model, and
	software version, if they can be determined.
Call Direction	In — For calls received.
	Out — For calls placed from the system.
Conference ID	A number given to each conference. A conference
	can include more than one far site, so there may be
	more than one row with the same conference ID.
Call ID	Identifies individual calls within the same
	conference.

Polycom, Inc. 289