Polycom 3725-77601-001H manual Add a Remote Alert Profile

Polycom CMA System Operations Guide

Alert Type	Alert indicates...
Directory Status	The CMA system gatekeeper cannot determine the
Unknown	directory status of the endpoint.
Directory Not	The endpoint is not registered to the directory service.
Registered
Presence Status	The CMA system gatekeeper cannot determine the
Unknown	presence status of the endpoint.
Presence	The endpoint is not registered to the presence service.
Unregistered
User Assistance	The endpoint user sent a request for help.
Request
Management	The CMA system is not one of the management URLs set
URL Not Set	on the endpoint, possibly because the management URL
	list is full.

	Note
	Because endpoint systems do not have an interface to
	manually delete management URLs, if the management
	list is full you must disconnect the endpoint’s network
	cable for two minutes. This should clear up all the mgmt
	server URLs.
Touch Control	The Touch Control device that was connected to the listed
Disconnected	HDX is no longer connected to the HDX.
Touch Control	The software version of the Touch Control platform is not
Software	compatible with the Endpoint software version.
Incompatible with
Endpoint
SIP URI Not	A dynamically-managed endpoint at a site with SIP
Provisioned	enabled does not have a SIP dial string reservation. The
	endpoint is provisioned without SIP enabled.
SIP Status	The SIP server cannot determine the status of the
Unknown	endpoint.
SIP Unregistered	The endpoint is not registered with the SIP server.

3 Click Update.

Add a Remote Alert Profile

You can add a remote alert profile to identify which device alerts from which devices should be sent as part of a remote alert profile. Note that using a combination of setting alerts by device type and by specific types, provide additional granularity in managing device alerts.

516 Polycom, Inc.