Polycom 3725-77601-001H manual Endpoint Monitor View, Logs, select System Management Reports

Polycom CMA System Operations Guide

Field	Description
Gatekeeper	The gatekeeper identifier (ASCII-only) on the network,
Identifier	which is used by the endpoints and CMA system for
	communication.
	The maximum number of characters is 254. All ASCII
	characters are valid.
Gatekeeper	The description (AS.CII only) of this gatekeeper on the
Description	network.
Default Gatekeeper	When enabled, indicates that this CMA system is the
	default gatekeeper on the network.
Allow Registration	Defines for the gatekeeper of which endpoints to allow
of	to register. For more information, see “Device
	Registration” on page 396.
Registration	The number of days that the CMA system gatekeeper
Refresh (seconds)	maintains the endpoint registration information, in case
	the endpoint has not yet received any.
	The default is 30 days.
	Enter 999 to prevent endpoint registrations from
	expiring automatically.
Registration	The interval at which the CMA system sends
Refresh (seconds)	“keep-alive” messages to registered endpoints to
	determine whether they are online. The default is 300
	seconds.
	If the endpoint responds with a registration request
	message, the endpoint is online. If not, the endpoint is
	offline.
	When the endpoint is registered to another gatekeeper,
	the CMA system still shows the endpoint’s status.
	To view the endpoint’s state (Online or Offline), go to
	Endpoint> Monitor View.

	Note
	Endpoints are Offline when they have been turned off
	or have been removed from the network. Endpoints
	return to an Online state when they have been turned
	on or have re-registered with CMA system.
Maximum Neighbor	Limits the number of connections to make when an
Gatekeeper Hop	endpoint seeks dialing resolution. The default is 3.
Counts
Log calls to/from	Logs calls to and from rogue endpoints. To view call
unregistered	logs, select System Management > Reports >
endpoints	Gatekeeper Message Log.

440 Polycom, Inc.