Polycom 3725-77601-001H manual Associate Sites with Microsoft Exchange Servers, Click Update

Server Setting Operations

2Configure these settings on the System Time page, as necessary.

Field	Description
System Time Zone	The time zone in which the CMA system server
	resides.
Auto adjust for	Select this option to adjust the clock automatically for
Daylight Saving?	daylight savings time.
Use Current Time	Select this option to input the current date and time.
Use External NTP	Select this option to synchronize the CMA system
Server Time	date and time with an external NTP server.
Synchronization
IP address or DNS	The IP address or fully qualified domain name (ASCII
resolved name	only) of the NTP server. If needed, enter multiple
	servers separated by a space.

Note

Make sure the current system time is correct before synchronizing with an NTP server. If you set the system to use an external NTP server when the current date and time are incorrect, the system time may be wrong for the amount of time specified in the Minutes between synchronization attempts.

3Click Update.

Integrate with Microsoft Exchange Server for Calendaring Management

The CMA system supports the Polycom Conferencing for Outlook solution. It allows you to provision endpoints with the credentials, mailbox address, Exchange server IP address, and calendaring service settings they need to use Polycom Conferencing for Outlook.

This section describes the tasks that enable provisioning endpoints for Polycom Conferencing for Outlook.

Associate Sites with Microsoft Exchange Servers

By default, the CMA system is set up to automatically discover the Exchange server for the domain in which a site is located. However, if you wish to associate sites with an Exchange server using its IP address or DNS name, follow this procedure.

Polycom, Inc. 405