OFF: if your DSS® satellite receiver is NON remote-
controllable.
•Satellite channels will be selected by the own channel selector of the DSS® satellite receiver.
The VCR channel should be set to the output channel of the DSS® satellite receiver.
→Go to step 8.
PROGRAM SET UP PRESET
|
| USE | nO C . BOX DSS | |
| ||||
|
| OUTPUT CH | 3 CH | |
|
|
|
|
|
|
| COnTROL | OFF On | |
|
|
| ||
EnD: PROG |
|
7 Select “BRAND TYPE” usingCURSOR DOWN, and enter a brand code of your DSS® satellite receiver using number buttons. Refer to the table on the next page.
Example: For a TOSHIBA DSS® satellite receiver, identified by number 99.
PROGRAM |
|
| SET UP | PRESET |
|
| VCR display | ||
|
|
|
|
| |||||
|
|
|
|
|
|
|
|
|
|
USE | nO C . BOX DSS |
|
| ||||||
|
|
|
| ||||||
OUTPUT CH |
| 3 CH |
|
| |||||
COnTROL | OFF | On |
|
| |||||
BRAnD TYPE | nO . 99 |
|
|
EnD: PROG
Make sure that the background of the above display has changed to the satellite program on channel 200. If not, relocate the DSS® satellite receiver on the VCR so that it can receive the infrared signal.
8 Press PROG. to exit.
Notes
•If your satellite channel does not change to 200 in step 7, the DSS® satetllite receiver will not be able to change channels in the timer recording. In this
case, set “CONTROL” to “OFF” in step6.
• The VCR Plus+ C3 ® system recording is not available on satellite channels.
•The DSS® satellite receiver control is not compatible with the cable box control.
RECORDING
Once you complete the
•POWER (CABLE BOX)
To turn the DSS® satellite receiver on or off.
•CH (CABLE BOX)
To select satellite channels in the upper or lower direction. (not applicable to some brands of DSS® satellite receiver.)
•Number buttons (0 – 9)
To select desired channels to record.
Brand name of your | Brand code |
DSS® satellite receiver | |
TOSHIBA | 99 |
|
|
RCA | 98 |
|
|
SONY | 97 |
|
|
39