TP-Link TD-W8960N - page 22

TD-W8960N 300Mbps Wireless N ADSL2+ Modem Router User Guide
14
PPP Username and PPP Password given by your ISP, and then click Next.
Figure 3-10
) Note:
The Quick Setup Wizard will guide you to configure the WAN Service over ATM interface.
4. On the Wireless Configurations screen, we use the default SSID, select Network
Authentication (take Mixed WPA2/WPA-PSK Personal for example), set a Pre-Shared Key,
and then click Save to continue.
Figure 3-11
) Note:
The default ATM&WAN service will be cleared after clicking the Next button on this Quick Setup
page.
5. You will see the Summary screen below, click Confirm to configure these settings.