TD-W8960N 300Mbps Wireless N ADSL2+ Modem Router User Guide
58
¾ Country: Restrict the channel set and transmit power.
Click Apply/Save to save your settings.
4.5.2 Security Choose “Wireless”Æ”Security”, you will see the screen of Wireless--Security settings shown as
below. You can configure security features of the wireless LAN interface by manually setting the
network authentication or through WPS (Wi-Fi Protected Setup) method.
Figure 4-66
4.5.2.1 WPS Setup
Back to LED Explanation
This section will guide you to add a new wireless device to an existing network quickly by WPS (or
called QSS) method.
) Note:
1) This feature is available only when OPEN, WPA-PSK, WPA2-PSK or Mixed WPA2/WPA-PSK
mode is configured.
2) To build a successful connection by WPS, you should also do the corresponding configuration
of the new device for WPS function meanwhile.
I. By PBC
If the wireless adapter supports WPS and the Push Button Configuration (PBC) method, you can
add it to the network by PBC with the following two methods. Click Push-Button, you will see the
screen as shown below.