TP-Link TF-3239DL manual LED Status

TF-3239DL10/100Mbps PCI Network Adapter

¾Supports Auto-Negotiation function

¾Auto-setups IRQ and I/O address

¾Contains two large (2Kbyte) independent receive and transmit FIFOs

¾One STP/UTP connector for 10Mbps or 100Mbps network Speed

¾Provides diagnostic software and one LED to indicate network Link/activity

¾Supports Drivers for Linux-2.4.x, Windows 7 (32bit / 64bit), Windows Vista (32bit / 64bit), Windows 2000 and Windows XP

1.3LED Status

A red LED indicates if the 10 or 100Mbps STP/UTP has been link OK or not and is working or not. When the light is OFF, it indicates that the STP/UTP port has not been connected or link not OK; When the light is ON, it indicates that the STP/UTP port link OK. When the light is BLINKING, it indicates that the STP/UTP port is receiving data or transmitting data.

3