2.6 Hardware Connection – Internet

TL-PA210AV200 Nano Powerline Adapter

2.6 Hardware Connection – Internet

This section describes how to connect the Powerline Adapter into your existing ADSL broadband connection via ADSL Ethernet port. Follow the procedures described below to connect the Powerline Adapter to your ADSL broadband connection:

1Connect one end of the provided Ethernet (RJ45) cable to the Powerline Adapter’s Ethernet port.

2Connect the other end of the Ethernet (RJ45) cable to an available Ethernet port of your ADSL broadband Router.

3Plug the Powerline Adapter into a wall socket next to the computer.

4Turn on your computer.

5Check and confirm that the Manual background Power LED, Manual background Ethernet LED, and Manual background Powerline LED on the Powerline Adapter are ON.

The hardware connection mechanism is shown below:

7

Page 13
Image 13
TP-Link manual Hardware Connection - Internet, TL-PA210 AV200 Nano Powerline Adapter