|
|
|
| AV200 Nano Powerline Adapter | |
|
|
|
|
| |
|
| On | The Ethernet port is connected, but there is no data |
| |
|
| being transferred. |
| ||
|
|
|
| ||
| Ethernet LED | Blinking | The Ethernet port is transferring data. |
| |
|
| Off | The Ethernet port isn’t connected. |
| |
)Note:
5 minutes after the device connected to the adapter is turned off, and the adapter will automatically switch to the
2.3 Physical Interface
There are three physical interfaces on this Powerline Adapter.
Pair Button
Power Plug
Ethernet Port
Interface | Description | |
Ethernet Port | A 10/100Mbps Ethernet port for connecting the adapter to the PC or the | |
broadband device with a network cable. | ||
| ||
|
| |
Power Plug | A Power Plug for connecting the adapter to a | |
power socket. | ||
| ||
|
| |
| Pair buttons are used to secure a powerline network. To secure your | |
| network, please follow the steps below. Firstly, plug in a new adapter, | |
Pair Button | and press its pair button for 1 second; then plug in another adapter and | |
press its pair button for 1 second as well. The two buttons should be | ||
| ||
| pressed within 2 minutes of each other. After that, wait about 60 seconds | |
| so that the two adapters can finish connecting. | |
|
|
5
