TP-Link TL-PA210 Join an existing Powerline AV Network, The sequence of and can be exchanged

Models: TL-PA210

1 27
Download 27 pages 39.47 Kb
Page 26
Image 26
Join an existing Powerline AV Network:

TL-PA210AV200 Nano Powerline Adapter

Join an existing Powerline AV Network:

Powerline adapter A and Powerline adapter B form a HomeplugAV Network, Powerline adapter C wants to join this network.

Step 1. Press and hold the Pair button on Powerline adapter C for 1 second.

Step 2. Press and hold the Pair button on Powerline adapter A/B for 1 second. (This step must be taken within 120 seconds after step 1 is finished.)

Step 3. Wait for about 60 seconds while your Powerline adapters are connecting. The Power LED on Powerline adapter A/B and C will stop flashing and become solid light when the connection is made.

)Note:

The sequence of Step 1 and Step 2 can be exchanged.

Leave an existing Powerline AV Network:

As the figure above shown, Powerline adapter A, B and C have formed a HomeplugAV Network. The user wants to remove one device (Powerline adapter A) from this network.

Step 1. Press and hold the Pair button on Powerline adapter A for at least 10 seconds. Powerline adapter A will reset and restart. (The Power LED of Powerline adapter A will momentarily extinguish during resetting, flash during restarting then illuminate steadily.)

Step 2. Wait for the reset to complete.

20

Page 26
Image 26
TP-Link TL-PA210 manual Join an existing Powerline AV Network, The sequence of and can be exchanged