TL-PA4030AV500 3-port Mini Powerline Adapter

Chapter 5 Advanced Feature: How to Use the Pair Button

5.1 Pair ( Secure with 128 bits-AES)

The Homeplug AV standard uses 128-bit AES (Advanced Encryption Standard) to safely transmit data between powerline adapters. For the powerline adapters to communicate with each other they all need to use the same Network Membership Key (NMK). Otherwise, they cannot unscramble the encrypted data sent in the powerline network.

The Pair button allows you to set up a secure powerline connection with other HomePlug AV compliant powerline devices which also support the Pair feature.

5.2 Set Up a Powerline AV Network with the Pair Button

You can connect a number of devices on a powerline network, but you can use the Pair button on only two devices at a time.

Create a Powerline network using the Pair button

Step 1. Press and hold the Pair button of Powerline adapter A for 1 second, the Power LED will start flashing.

Step 2. Within 2 minutes, press and hold the Pair button of Powerline adapter B for 1 second, the Power LED will start flashing.

Step 3. Wait for about 60 seconds while your Powerline adapter A and B are connecting. The Power LED on both adapters will stop flashing and become solid light when the connection is made.

21

Page 27
Image 27
TP-Link TL-PA4030 manual Advanced Feature How to Use the Pair Button, Pair Secure with 128 bits-AES