TL-PA4030 AV500 3-port Mini Powerline Adapter
| On | At least one Ethernet port is connected, but there is no |
| data being transferred. | |
|
| |
Ethernet LED | Blinking | At least one Ethernet port is transferring data. |
| Off | No Ethernet port is connected. |
2.3 Physical Interface
There are three types of physical interfaces on this Powerline Adapter.
Power Plug
Pair Button
Ethernet Port
Interface | Description | |
Ethernet Port | Three 10/100Mbps Ethernet ports for connecting the adapter to the PC or | |
the broadband device with a network cable. | ||
| ||
|
| |
Power Plug* | A Power Plug for connecting the adapter to a power socket | |
|
| |
| Pair button is used to secure a powerline network. To secure your network, | |
| please follow the steps below. Firstly, plug in a new adapter, and press its | |
Pair Button | pair button for 1 second; then plug in another adapter and press its pair | |
button for 1 second as well. The two buttons should be pressed within 2 | ||
| ||
| minutes of each other. After that, wait about 60 seconds so that the two | |
| adapters can finish connecting. | |
|
|
*The provided power plug may differ from the picture due to different regional power specifications. Here we take the EU version of this product as an example.
)Note:
1.If the pair button is pressed till all the LEDs turn off (about 10 seconds), the Powerline Adapter will leave the network which it is associated with and its network name assumes a random value. The Power LED turns off when it disconnects from the Powerline network.
2.For detailed information about the Pair button, please refer to Chapter 5 Advanced Feature: How to Use the Pair Button.
5
