TL-SG1008/TL-SG1016/TL-SG1024 | Gigabit Ethernet Switch User's Guide |
Package Contents
The following contents should be found in your box:
×One TL-SG1008/TL-SG1016/TL-SG1024 Switch
×One power cord
×This User's Guide
×Rubber footpads for Desk-mount
×Rack-mount kit for installing the switch in a 19-inch rack
Note: If any of the above contents is damaged or missing, please contact the retailer from whom you purchased the TL-SG1008/TL-SG1016/TL-SG1024 8/16/24-port Gigabit Ethernet Switch for assistance.
Chapter 1: Introduction of the Product
This chapter describes the features of the TL-SG1008/TL-SG1016/TL- SG1024 8/16/24-port Gigabit Ethernet Switch.
1.1Overview of the product
The TL-SG1008/TL-SG1016/TL-SG1024 8/16/24-port Gigabit Ethernet Switch provides you with a high-performance, low-cost, easy-to-use, seamless and standard upgrade to boost your old network to 1000Mbps. Increase the speed of your network server and backbone connections make Gigabit a reality. Power users in the home, office, workgroup, or creative production environment can now move large, bandwidth-intensive files faster. Transfer graphics, CGI, CAD, or multimedia files and other applications that have to move large files across the network almost instantly.
TL-SG1008/TL-SG1016/TL-SG1024 | Gigabit Ethernet Switch User's Guide |
The TP-LINK TL-SG1008/TL-SG1016/TL-SG1024 features a non-blocking switching architecture that forwards and filters packets at full wire-speed for maximum throughput. MAC address auto-learning and auto-aging, IEEE802.3x flow control for Full Duplex mode and backpressure for Half Duplex mode. It is compatible with all 10,100, and 1000Mbps Ethernet devices because it is standard-based, it protects your existing network investments while providing you with a straightforward migration path to faster Gigabit speeds.
The TP-LINK TL-SG1008/TL-SG1016/TL-SG1024 is plug-and-play and no configuration is required. Auto MDI/MDI-X cable detection on all ports eliminate the need for crossover cable or Uplink port. Each port can be used as general ports or Uplink ports, and any port can be simply plugged into a server, a hub, a router or a switch, using the straight cable or crossover cable. Diagnostic LEDs which display link status and activity, allowing you to quickly detect and correct problems on the network.
1.2Features
×Complies with IEEE802.3, IEEE802.3u, IEEE802.3ab standards
×8/16/24 10/100/1000Mbps Auto-Sense RJ45 ports supporting Auto-
MDI/MDIX
×All ports Support Full/Half Duplex transfer mode for 10/100Mbps and Full Duplex transfer mode for 1000Mbps
×Supports IEEE802.3x flow control for full-duplex model and backpressure for half-duplex transfer model
×Non-blocking switching architecture that forwards and filters packets at full wire-speed for maximum throughput
×Supports MAC address auto-learning and auto-aging
