TP-Link TL-SL1226/TL-SL1351 manual Connection, Ethernet Port, SFP Port, Verify Installation

Gigabit Uplink Unmanaged Switch

Chapter 4 Connection

4.1Ethernet Port

Please connect the Ethernet ports of the switch to the networkdevices by RJ45 cable as the following figure shown.

RJ45 Port

RJ45 Cable

Figure 4-1 Connecting the RJ45 Port

4.2 SFP Port

Connect the SFP port to a SFP module. The switch could identify and configure the SFP module automatically (for TL-SL1351 only).

SFP Port

SFP Module

Figure 4-2 Inserting the SFP Module

4.3 Verify Installation

After completing the installation, please verify the following items:

■■

■■

■■

■■

There are 5~10cm of clearance around the sides of the device for ventilation and the air flow is adequate.

The voltage of the power supply meets the requirement of the input voltage of the device. The power socket, device and rack are well grounded.

The device is correctly connected to other network device.

Connection 15