TL-WA801ND 300Mbps Wireless N Access Point User Guide
Selecting System Tools > Reboot allows you to reboot the device on the screen shown in Figure
4-39.
Figure 4-39 Reboot the device
Click the Reboot button to reboot the device.
Some settings of the device will take effect only after rebooting, which include:
• Change LAN IP Address (System will reboot automatically).
• Change the Wireless configurations.
• Change the Web Management Port.
• Upgrade the firmware of the device (system will reboot automatically).
• Restore the device's settings to factory defaults (system will reboot automatically).
• Update the configuration with a file (system will reboot automatically).
4.8.8 Password Selecting System Tools > Password allows you to change the factory default user name and
password of the device on the screen shown in Figure 4-40.
Figure 4-40 Password
It is strongly recommended that you change the factory default user name and password of the
device. All users who try to access the device's web-based management page or Quick Setup will
be prompted for the device's user name and password.
) Note:
The new user name and password must not exceed 14 characters in length and must not include
any spaces. Enter the new Password twice to confirm it.
60