TL-WA801ND 300Mbps Wireless N Access Point User Guide
Appendix C: Troubleshooting
T1. How do I restore my Access Point’s configuration to its factory default settings?
With the Access Point powered on, use a pin to press and hold the RESET button on the rear
panel for more than 8 seconds before releasing it.
) Note:
Once the Access Point is reset, the current configuration settings will be lost and you will need
to reconfigure the Access Point.
T2. What can I do if I forget my password?
1) Try to use the default user name and password: admin, admin;
2) Referring to the file that you have saved in step 6 of 3.1 Quick Setup last time you
configured the device, the file will show you the user name and password that you have
configured.
3) If the password is still not the correct one, then you can try to restore the Access Point’s
configuration to its factory default settings referring to previous section T1 and try to
reconfigure your AP by following the instructions in 3.1 Quick Setup.
T3. What can I do if I cannot access the web-based configuration page?
Assign a static IP address 192.168.0.100 for your computer first before logging in the
management page. Here takes the procedures in Windows 7 for example.
1) Go to Start > Settings > Control Panel, and then Click View network status and
tasks.
66