![](/images/new-backgrounds/1109644/10964445x1.webp)
N600 Wireless Dual Band PCI Express Adapter User Guide
Figure
3.2.2 PIN method
There are two ways to configure the WPS by PIN method:
1)Enter the PIN from your Router or AP device.
2)Enter a PIN into your Router or AP device.
( Note: This method is available in Windows XP and Windows Vista, not in Windows 7.) Following are the detailed configuration procedures of each way.
3.2.2.1. Enter the PIN from your Router or AP device
1.Open TWCU and click WPS tab. Select Enter the PIN of my access point or wireless Router. In the empty field beside PIN, enter the PIN labeled on the bottom of the Router (here takes 13492564 for example). If you have generated a new PIN code for your Router, please enter the new one instead. Click Connect to continue.
Figure
15