TP-Link TL-WN8200ND manual To connect using WPS, PBC Push Button Configuration method

TL-WN8200ND300Mbps High Power Wireless USB Adapter

Figure 3-8

3.2To connect using WPS

WPS (Wi-Fi Protected Setup) function allows you to add a new wireless device to an existing network quickly.

If the wireless router supports Wi-Fi Protected Setup (WPS), you can establish a wireless connection between wireless card and router using either Push Button Configuration (PBC) method or PIN method.

3.2.1 PBC (Push Button Configuration) method

1.Press the WPS/RESET button for 2~3 seconds on the back panel of the router. Here takes router TL-WR841ND for example.

2.Press the WPS button on the adapter. There are two ways: ¾ Method One：

Press and hold the WPS button on the adapter directly for 2~3 seconds until Figure63-11 appears.

13