TP-Link manual Software Configuration, Login, Status, TL-WR340G/TL-WR340GD

TL-WR340G/TL-WR340GD

54Mbps Wireless Router User Guide

Chapter 4.Software Configuration

This User Guide recommends using the “Quick Installation Guide” for first-time installation, For advanced users, if you want to know more about this device and make use of its functions adequately, you need to read this chapter and configure advanced settings though the Web-based Utility.

4.1Login

After your successful login, you can configure and manage the device. There are main menus on the left of the web-based utility. Submenus will be available after you click one of the main menus. On the right of the web-based utility, there are the detailed explanations and instructions for the corresponding page. To apply any settings you have altered on the page, please click the Save button.

4.2Status

The Status page displays the router's current status and configuration. All information is read-only.

¾LAN - This field displays the current settings or information for the LAN, including the MAC address, IP address and Subnet Mask.

¾Wireless - This field displays basic information or status for wireless function, including

Wireless Radio, SSID, Channel, Mode, Wireless MAC address, and IP address.

¾WAN - These parameters apply to the WAN port of the router, including MAC address, IP address, Subnet Mask, Default Gateway, DNS server and WAN connection type. If PPPoE is chosen as the WAN connection type, the Disconnect button will be shown here while you are accessing the Internet. You can also cut the connection by clicking the button. If you have not connected to the Internet, just click Connect to establish the connection.

¾Traffic Statistics - This field displays the router's traffic statistics.

¾System Up Time - The total up time of the router from when it was switched on or reset.

17