To add a new rule, follow the steps below | TP-Link TL-WR940N

To add a new rule, follow the steps below.

TL-WR940NWireless N Router

Figure 4-32Port Triggering

Once the Router is configured, the operation is as follows:

1.A local host makes an outgoing connection using a destination port number defined in the Trigger Port field.

2.The Router records this connection, opens the incoming port or ports associated with this entry in the Port Triggering table, and associates them with the local host.

3.When necessary the external host will be able to connect to the local host using one of the ports defined in the Incoming Ports field.

¾Trigger Port - The port for outgoing traffic. An outgoing connection using this port will "Trigger" this rule.

¾Trigger Protocol - The protocol used for Trigger Ports, either TCP, UDP, or All (all protocols supported by the Router).

¾Incoming Ports Range - The port or port range used by the remote system when it responds to the outgoing request. A response using one of these ports will be forwarded to the PC that triggered this rule. You can input at most 5 groups of ports (or port section). Every group of ports must be set apart with ",". For example, 2000-2038, 2050-2051, 2085, 3010-3030.

¾Incoming Protocol - The protocol used for Incoming Ports Range, either TCP or UDP, or ALL (all protocols supported by the Router).

¾Status - The status of this entry either Enabled or Disabled.

To add a new rule, follow the steps below.

1.Click the Add New… button, the next screen will pop-up as shown in Figure 4-33.

2.Select a common application from the Common Applications drop-down list, then the Trigger Port field and the Incoming Ports field will be automatically filled. If the Common Applications do not have the application you need, enter the Trigger Port and the Incoming Ports manually.

3.Select the protocol used for Trigger Port from the Trigger Protocol drop-down list, either TCP, UDP, or All.

4.Select the protocol used for Incoming Ports from the Incoming Protocol drop-down list,

-52-

Image 60

TP-Link manual To add a new rule, follow the steps below, TL-WR940N Wireless N Router

Contents

TL-WR940N Wireless N Router Rev 1.1.0 COPYRIGHT & TRADEMARKS FCC STATEMENT FCC RF Radiation Exposure Statement CE Mark WarningNational restrictions Country Industry Canada Statement Korea Warning StatementsNCC Notice DECLARATION OF CONFORMITY ETSI EN 300 328 V1.7.1ETSI EN 301 489-1 V1.8.12008& ETSI EN 301 489-17 EN 550222006 +A12007 EN 550241998+A12001+A22003 EN 61000-3-22006+A12009+A22009 EN CONTENTS Package ContentsChapter 4.6.5 4.15.1 Package Contents TL-WR940N Wireless N Router Flexible Access Control Simple InstallationChapter 1.Introduction 1.1 Overview of the Router 1.3 Main Features 1.4 Panel Layout1.4.1 The Front Panel Wireless N Router 1.4.2 The Rear PanelTL-WR940N Indication ¾ RESET Chapter 2.Connecting the Router 2.2 Installation Environment Requirements2.3 Connecting the Router 2.1 System Requirements Figure 2-1 Hardware Installation of the TL-WR940N Wireless N Router Chapter 3.Quick Installation Guide 3.1 TCP/IP Configuration Please check the connection following these steps Figure 3-1 Success result of Ping commandFigure 3-2 Failure result of Ping command 1. Is the connection between your PC and the Router correct? 3.2 Quick Installation Guide Figure 3-5 Quick Setup Figure 3-6 Choose WAN Connection Type Figure 3-7 Quick Setup - PPPoE Figure 3-8 Quick Setup - MAC Clone Figure 3-9 Quick Setup - MAC Clone Figure 3-10 Quick Setup - Static IP Note Dialog z PSK Password - You can enter ASCII or Hexadecimal characters Figure 3-13 Quick Setup - Finish Chapter 4.Configuring the Router 4.1 Login4.2 Status 4.3 Quick Setup 4.4 QSSPlease refer to 3.2 Quick Installation Guide Figure 4-1 Router Status I. By PBC Method One Method Two Method Three The QSS Configuration Screen of Wireless Adapter TL-WR940N Wireless N Router II. By PIN Method Two Enter the PIN from my Router 4.5 Network 4.5.1 WANadded to the network Figure 4-5 WAN - Dynamic IP Figure 4-6 WAN - Static IP Figure 4-7 WAN - PPPoE Figure 4-8 PPPoE Advanced Settings NSW / ACT - nsw.bigpond.net.au QLD - qld.bigpond.net.au Figure 4-10 L2TP Settings Figure 4-11 PPTP Settings z Dynamic IP - Connections which use dynamic IP address assignment z Static IP - Connections which use static IP address assignment 4.5.2 LAN 4.5.3 MAC CloneFigure 4-12 LAN Figure 4-13 MAC Address Clone 4.6 Wireless 4.6.1 Wireless SettingsOnly the PC on your LAN can use the MAC Address Clone function Figure 4-15 Wireless Settings ¾ Mode - Select the desired mode. The default setting is 11bgn mixed 4.6.2 Wireless Security ¾ WPA /WPA2 - Enterprise - It’s based on Radius Server Encryption - You can select either Automatic, or TKIP or AES 4.6.3 Wireless MAC Filtering Figure 4-20 Wireless MAC address Filtering 4. Click the Save button to save this entry 4.6.4 Wireless Advanced to access for Filtering Rules 4.6.5 Wireless Statistics 4.7.1 DHCP Settings 4.7 DHCPThis page will be refreshed automatically every 5 seconds ¾ Default Domain - Optional. Input the domain name of your network 4.7.2 DHCP Clients List 4.7.3 Address Reservation 4.8 Forwarding To Reserve IP addressesTo modify or delete an existing entry To set up a virtual server entry 4.8.1 Virtual Servers 4.8.2 Port Triggering Figure 4-31 Add or Modify a Virtual Server Entry To add a new rule, follow the steps below 4.8.3 DMZ 3. Incoming Port Range cannot overlap each other 4.8.4 UPnP To assign a computer or server to be a DMZ server 4.9 Security 4.9.1 Basic Security Figure 4-37 Basic Security z z z 4.9.2 Advanced Security 4.9.3 Local Management 4.9.4 Remote Management Figure 4-39 Local Management 4.10Parental Control Figure 4-40 Remote Management To add a new entry, please follow the steps below 7. Click the Save button 4.11Access Control 4.11.1 Rule To add a new rule, please follow the steps below Figure 4-45 Access Control Rule Management Figure 4-46 Add or Modify Internet Access Control Entry 4.11.2 Host Figure 4-47 Host Settings Figure 4-48 Add or Modify a Host Entry Figure 4-49 Add or Modify a Host Entry 4.11.3 Target Figure 4-50 Target Settings Figure 4-51 Add or Modify an Access Target Entry Figure 4-52 Add or Modify an Access Target Entry 4.11.4 Schedule To add a new schedule, follow the steps below 4.12 Advanced Routing Figure 4-54 Advanced Schedule SettingsFigure 4-55 Advanced Routing Other configurations for the entries 4.12.1 Static Routing ListTo add static routing entries 4.13Bandwidth Control 4.12.2 System Routing Table 4.13.1 Control Settings 4.13.2 Rules List 4.14IP & MAC Binding Setting 4.14.1 Binding SettingTo add/modify a Bandwidth Control rule, follow the steps below To add IP & MAC Binding entries, follow the steps below To modify or delete an existing entry, follow the steps belowTo find an existing entry, follow the steps below Figure 4-64 Binding Setting 4.14.2 ARP List Figure 4-66 Find IP & MAC Binding EntryFigure 4-67 ARP List 4.15Dynamic DNS 4.15.1 Comexe.cn DDNS To set up for DDNS, follow these instructions 4.15.2 Dyndns.org DDNS 4.15.3 No-ip.com DDNS Figure 4-69 Dyndns.org DDNS Settings 4.16System Tools Figure 4-70 No-ip.com DDNS SettingsFigure 4-71 The System Tools menu 4.16.1 Time Settings To set time manually 4.16.2 Diagnostic To set time automaticallyTo set Daylight Saving 2. The time will be lost if the router is turned off Figure 4-73 Diagnostic Tools 4.16.3 Firmware Upgrade To upgrade the Routers firmware, follow these instructions below 4.16.4 Factory Defaults 4.16.5 Backup & Restore4. The Router will reboot after the upgrading has been finished 4.16.6 Reboot 4.16.7 Password 4.16.8 System Log Figure 4-80 System Log Figure 4-81 Mail Account Settings 4.16.9 Statistics Figure 4-82 Statistics Statistics Table Appendix A FAQ 1. How do I configure the Router to access Internet by ADSL users? 3. I want to use Netmeeting, what do I need to do? Figure A-3 MAC CloneFigure A-4 Virtual Servers Figure A-5 Add or Modify a Virtual server Entry Figure A-6 DMZ 4. I want to build a WEB Server on the LAN, what should I do? 5. The wireless stations cannot connect to the Router field of the Web browser Appendix B Configuring the PCs 1. Install TCP/IP component ¾ Setting IP address automatically Now you have two ways to configure the TCP/IP protocol belowshown in the Figure below Figure B-2 ¾ Setting IP address manually Figure B-3 Figure B-4 Appendix C Specifications WirelessGeneral Environmental and Physical Appendix D Glossary identifying a wireless local area network. For the wireless devices in a network to communicate with each other, all devices must be configured with the same SSID. This is typically the configuration parameter for a wireless PC card. It corresponds to the ESSID in the wireless Access Point and to the wireless network name