300Mbps Wireless N Router TL-WR940N/TL-WR941ND
-4-
1.4 Panel Layout 1.4.1 The Front Panel
Figure 1-1 Front Panel sketch
The router’s LEDs and the Wireless On/Off button are located on the front panel (View from left to
right).
Name Status Indication
Off Power is off.
PWR On Power is on.
On The router is initializing or maybe has a system error.
Flashing The router is working properly.
SYS
Off The router has a system error.
Off The Wireless function is disabled.
WLAN Flashing The Wireless function is enabled.
Off There is no device linked to the corresponding port.
On There is a device linked to the corresponding port but there is no
activity.
WAN,
LAN 1-4
Flashing There is an active device linked to the corresponding port.
Slow Flash A wireless device is connecting to the network by WPS function.
This process will last in the first 2 minutes.
On A wireless device has been successfully added to the network by
WPS function.
WPS
Quick Flash A wireless device failed to be added to the network by WPS
function.
Table 1-1 The LEDs description
) Note:
After a device is successfully added to the network by WPS function, the WPS LED will keep on
for about 5 minutes and then turn off.