TP-Link TL-WR940N 4.12 Advanced Routing

300Mbps Wireless N Router TL-WR940N/TL-WR941ND

-71-

4.12 Advanced Routing

Figure 4-56 Advanced Routing

There are two submenus under the Advanced Routing menu as shown in Figure 4-56: Static

Routing List and System Routing Table. Click any of them, and you will be able to configure the

corresponding function.

Choose menu “Advanced Routing → Static Routing List”, and then you can configure the

static route in the next screen (shown in Figure 4-57). A static route is a pre-determined path that

network information must travel to reach a specific host or network.

Figure 4-57 Static Routing

To add static routing entries:

1. Click Add New… shown in Figure 4-57, you will see the following screen.

Figure 4-58 Add or Modify a Static Route Entry

2. Enter the following data: