TP-Link WiFi Pocket Router/AP/TV Adapter/repeater manual To add a new device, II. By PBC

TL-WR710N

WiFi Pocket Router/AP/TV Adapter/Repeater

¾Disable PIN of this Device - WPS external registrar of entering the device’s PIN can be disabled or enabled manually. If the device receives multiple failed attempts to authenticate an external Registrar, this function will be disabled automatically.

¾Add Device - You can add a new device to the existing network manually by clicking this button.

To add a new device:

If the wireless adapter supports Wi-Fi Protected Setup (WPS), you can establish a wireless connection between wireless adapter and device using either Push Button Configuration (PBC) method or PIN method.

)Note:

To build a successful connection by WPS, you should also do the corresponding configuration of the new device for WPS function meanwhile.

For the configuration of the new device, here takes the Wireless Adapter of our company for example.

II. By PBC

If the wireless adapter supports Wi-Fi Protected Setup and the Push Button Configuration (PBC) method, you can add it to the network by PBC with the following two methods.

Method One:

Step 1: Keep the WPS Status as Enabled and click the Add Device button in Figure 5-3,then the following screen will appear.

Figure 5-4 Add A New Device

Step 2: Choose “Press the button of the new device in two minutes” and click Connect.

Step 3: For the configuration of the wireless adapter, please choose “Push the button on my access point or wireless router” in the configuration utility of the WPS as below, and click Connect.

- 108 -