TP-Link WiFi Pocket Router/AP/TV Adapter/repeater manual Wireless Working Mode Settings

TL-WR710N

WiFi Pocket Router/AP/TV Adapter/Repeater

Figure 4-6

)Note:

1)The WPS LED on the AP will light green for five minutes if the device has been successfully added to the network.

2)The WPS function cannot be configured if the Wireless function of the AP is disabled. Please make sure the Wireless function is enabled before configuring the WPS.

4.5 Working Mode

The Router supports five operation mode types: Wireless Router, Access Point, Repeater, Client and Wireless Client Router. Please select one you want. Click Save to save your choice, which is shown as Figure 4-7.

Figure 4-7 Wireless Working Mode Settings

¾Wireless Router - The wireless Router Mode. In this mode, the device enables multi-user to share Internet via DSL/Cable Modem. The only wired port works as WAN.

¾Access Point - The wireless access point mode.

¾Repeater - The wireless Repeater Mode. It could extend the range of wireless network.

¾Client - The Client Mode. The computer connected by Ethernet could get access to an AP by Client mode.

¾WISP Client Router - In this mode, the device enables multiple users to share Internet connection from WISP.

- 36 -