Maintenance

WARNING:

Hazardous Service Procedures! The maintenance and trouble- shooting procedures recommend- ed in this section of the manual could result in exposure to electri- cal, mechanical or other potential safety hazards. Always refer to the safety warnings provided throughout this manual concern- ing these procedures. When possi- ble, disconnect all electrical power including remote discon- nects before servicing. Follow proper lockout/tagout procedures to ensure the power can not be in- advertently energized. When nec- essary to work with live electrical components, have a qualified li- censed electrician or other indi- vidual who has been trained in handling live electrical compo- nents perform these tasks. Failure to follow all of the recommended safety warnings provided, could result in death or serious injury.

Maintenance

Perform all of the indicated mainte- nance procedures at the

intervals scheduled. This will prolong the life of the unit and reduce the pos- sibility of costly equipment failure.

Monthly

Conduct the following maintenance inspections once per month.

WARNING:

Hazardous Voltage w/Capacitors! Disconnect all electrical power, including remote disconnects and discharge all motor start/run ca- pacitors before servicing. Follow proper lockout/tagout procedures to ensure the power cannot be in- advertently energized. Verify with an appropriate voltmeter that all capacitors have discharged. Fail- ure to diconnect power and dis- charge capacitors before servicing could result in death or serious injury.

Note: For additional information regarding the safe discharge of capacitors, see PROD-SVB06A-EN or PROD-SVB06A-FR.

1.Inspect air filters and clean if neces- sary.

2.Check unit wiring to ensure all con- nections are tight and that the wir- ing insulation is intact.

3.Check drain pans and condensate piping to insure they are free of ob- stacles.

4.Manually rotate the indoor fan to in- sure proper operation.

5.Inspect the evaporator and con- denser coils for dirt and debris. If the coils appear dirty, clean them.

6.With the unit operating in the cool-

ing mode, check the suction and dis- charge pressures. Record these readings on the “Maintenance Log.”

7.Observe indoor fan operation and correct any unusual or excessive vi- bration. Clean blower wheels as needed.

Annually (Cooling Season) The following maintenance proce- dures must be performed at the begin- ning of each cooling season to insure efficient unit operation.

1.Perform all of the monthly mainte- nance inspections.

2.With the unit operating, check unit superheat and record the reading in the Maintenance Log.

3.Remove any accumulation of dust and/or dirt from the unit casing.

4.Remove corrosion from any surface and repaint. Check the gasket around the control panel door to in- sure it fits correctly and is in good condition to prevent water leakage.

5.Inspect the evaporator fan belt. If it is worn or frayed, replace it.

6.Inspect the control panel wiring to insure that all connections are tight and that the insulation is intact.

7.Check refrigerant piping and fittings for leaks.

PKG-SVX17A-EN

23

Page 22 Page 24
Page 23
Image 23
Trane PKG-SVX17A-EN manual Maintenance, Monthly
Page 22 Page 24

PKG-SVX17A-EN specifications

The Trane PKG-SVX17A-EN is an advanced packaged air conditioning system designed for commercial applications. This unit stands out due to its robust construction, high efficiency, and user-friendly features, making it a suitable option for various building types, including offices, restaurants, and retail spaces.

One of the main features of the PKG-SVX17A-EN is its high energy efficiency, which is achieved through the incorporation of variable speed technology. This technology allows the compressor to adjust its output based on the cooling and heating demands of the space, leading to reduced energy consumption and lower utility bills. Additionally, the system’s SEER (Seasonal Energy Efficiency Ratio) ratings exceed industry standards, which is beneficial for both environmental sustainability and operational costs.

The PKG-SVX17A-EN utilizes advanced refrigerant management systems that incorporate environmentally friendly refrigerants. This aligns with Trane's commitment to sustainability and compliance with global environmental regulations. The unit is also equipped with an intelligent controller that enables precise monitoring and control of temperature, humidity, and airflow. This feature ensures optimal comfort levels while maximizing efficiency.

In terms of installation, the PKG-SVX17A-EN is designed for easy integration into existing infrastructure. Its compact design allows for flexible placement and minimizes the required space, making it ideal for commercial rooftops. The unit also incorporates advanced sound dampening technologies to reduce operational noise, making it suitable for noise-sensitive environments.

Another key characteristic of the Trane PKG-SVX17A-EN is its comprehensive warranty program, which provides peace of mind to building owners and operators. This warranty covers critical components and provides access to Trane’s extensive service network, ensuring that the system remains in peak operating condition throughout its lifespan.

The PKG-SVX17A-EN is designed with user convenience in mind, featuring accessible service points for maintenance and servicing. This design minimizes downtime and ensures that system performance remains at peak levels.

In summary, the Trane PKG-SVX17A-EN packaged air conditioning system is an innovative solution for commercial environments that value efficiency, reliability, and sustainability. With its advanced technologies and thoughtful design features, it is well-equipped to meet the demands of modern commercial spaces while promoting energy savings and enhanced comfort.
Top Page Image Contents