Service Model Number Description

WARNING

Fiberglass Wool!

WARNING: ALL INSULATED UNITS (except closed-cell foam insulation) CONTAIN FIBERGLASS WOOL! Read this literature prior to installation for proper instruction. Disturbing the insulation in this product during installation, maintenance or repair will expose you to airborne particles of glass wool fibers and ceramic fibers known to the state of California to cause cancer through inhalation. Glass wool fibers may also cause respiratory, skin or eye irritation.

Single-Duct Units

Digit 1, 2—UnitType

VC

VariTrane single-duct

Digit 3—Reheat

CCooling Only

E Electric Heat

W HotWater Heat

Digit 4—Development Sequence

F Sixth

Digit 5, 6—Primary AirValve

044" inlet (225 cfm)

055" inlet (350 cfm)

066" inlet (500 cfm)

088" inlet (900 cfm)

1010" inlet (1400 cfm)

1212" inlet (2000 cfm)

1414" inlet (3000 cfm)

1616" inlet (4000 cfm)

2424" x 16" inlet (8000 cfm)

Digit 7, 8—Not Used

00 N/A

Digit 9—Not Used

0 N/A

Digit 10, 11—Design Sequence

H0 Fourth (factory assigned)

Digit 12, 13, 14, 15—Controls

ENON No controls, field-installed DDC/electric

PNON No controls, field-installed pneumatic

DD00 Trane elec actuator only DD01 DDC – Cooling only

DD02 DDC – N.C. on/off water valve control

DD03 DDC – Prop hot water valve control

DD04 DDC – On/off electric heat DD05 DDC – Pulse-width modulation

electric heat

DD07 DDC – N.O. on/off water valve control

DD11 LonTalk DDC Controller— Cooling only

DD12 LonTalk DDC Controller w/ N.C. on/off hot water control

DD13 LonTalk DDC Controller w/ proportional hot water control

DD14 LonTalk DDC Controller–on/off electric heat control

DD15 LonTalk DDC Controller w/ pulse-width modulation electric heat control

DD17 LonTalk DDC Controller w/ N.O. on/off hot water control

FM00 FM – Customer-supplied actuator & controller

FM01 FM –Trane actuator w/ cusomer- supplied control

VMA1 FM – Johnson controlsVMA-1410 VMA2 FM – Johnson controlsVMA-1420 PWR1 FM – Seimens 540-100 w/

GDE131.1P actuator

PWR4 FM – Seimens 540-100 w/Trane actuator

PWR5 FM – Seimens 540-100 w/ GDE131.1U actuator

AT01 FM – Automated Logic U341V+ AT02 FM – Automated Logic U141V+ EI05 Analog –With optional on/off

reheat

EI28 Analog –With optional on/off reheat with dual-minimum cfm

EI29 Analog –With optional on/off reheat with constant-volume cfm

PC00 PN – N.C.Trane pneumatic actuator

PC04 PN – N.C. with optional on/off HW, DA Stat

PC05 PN – N.C. with optional on/off electric, RA Stat

PN00 PN – N.O.Trane pneumatic actuator, RA Stat

PN04 PN – N.O. PVR, DA Stat

PN05 PN – N.O. PVR, RA Stat

PN11 PN – N.O. dual-minimum cfm, DA Stat

PN32 PN – WaterValve, N.O. constant volume, DA Stat

PN34 PN – Electric heat, N.O. constant volume, DA Stat

Notes:

N.C. = Normally-closed

N.O. = Normally-opened

DA Stat = Direct-acting pneumatic t-stat (by others)

RA Stat = Reverse-acting pneumatic t-stat (by others)

PN = Pneumatic

FM = Factory installation of customer- supplied controller

PVR = PneumaticVolume Regulator

Digit 16—Insulation

A1/2" Matte-faced

B1" Matte-faced

C1/2" Foil-faced

D1" Foil-faced

F1" Double-wall

G3/8" Closed-cell

4

VAV-SVN01E-EN

Page 4
Image 4
Trane VAV-SVN01E-EN, Trane manual Fiberglass Wool Single-Duct Units

VAV-SVN01E-EN, Trane specifications

The Trane VAV-SVN01E-EN is an advanced variable air volume (VAV) system designed to optimize indoor air quality and energy efficiency in commercial buildings. This system is part of Trane’s commitment to offering reliable, innovative HVAC solutions that meet the demands of modern architectural designs and energy standards.

One of the main features of the VAV-SVN01E-EN is its ability to control air flow based on occupancy and environmental conditions. This ensures that energy is used efficiently, as airflow can be adjusted to match real-time needs, rather than operating at a constant rate. The integration of intelligent sensors allows the system to adapt dynamically, leading to both reduced energy consumption and improved comfort for building occupants.

The technology behind the VAV-SVN01E-EN includes advanced digital controls and integration capabilities. These controls enable the system to communicate seamlessly with building management systems (BMS), allowing for centralized monitoring and management. This interconnected approach not only enhances operational efficiency but also enables predictive maintenance, helping facility managers identify and address potential issues before they become problematic.

Energy efficiency is further enhanced through the use of VAV technology, which reduces the amount of conditioned air delivered when spaces are unoccupied or when less cooling or heating is required. This tailored approach contributes to lower energy costs and supports sustainability initiatives by decreasing the overall carbon footprint of the building.

Key characteristics of the Trane VAV-SVN01E-EN include its compact design, which facilitates easy installation in existing spaces without significant modifications. The unit is also designed for low sound levels, ensuring that it operates quietly, contributing to a more pleasant indoor environment. Moreover, the VAV system is engineered to be reliable and durable, with rigorous testing and high-quality components ensuring long-term performance.

In summary, the Trane VAV-SVN01E-EN stands out in the field of HVAC solutions, bringing together advanced technology, energy efficiency, and user comfort. Its features are tailored for modern building requirements, making it a preferred choice for facility managers aiming to enhance indoor air quality while reducing operational costs.