Overview

Location of Serial Number & MAC Address

Location of Serial Number & MAC Address

The serial number and MAC address label can be found on the back of each radio. The serial number and MAC address is also provided within the system information (sysinfo) screen.

Trango Broadband Wireless

P5010M- INT

Rev. A

S/N:

000001420

 

MAC:

00 01 DE 00 02 F2

 

FCC ID: NCYP5010M

Canada: XXXXXXXXXX

THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES: OPERATION IS

SUBJECT TO THE FOLLOWING CONDITIONS: (1) THIS DEVICE MAY NOT

CAUSE HARMFUL INTERFERANCE, AND (2) THIS DEVICE MUST ACCEPT

ANY INTERFERENCE THAT MAY CAUSE UNDESIRED OPERATION.

P5010M-INT

Trango Broadband Wireless

P5010M- EXT

Rev. A

S/N:

000001421

 

MAC:

00 01 DE 00 02 F3

 

FCC ID: NCYP5010M

Canada: XXXXXXXXXX

THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES: OPERATION IS

SUBJECT TO THE FOLLOWING CONDITIONS: (1) THIS DEVICE MAY NOT

CAUSE HARMFUL INTERFERANCE, AND (2) THIS DEVICE MUST ACCEPT

ANY INTERFERENCE THAT MAY CAUSE UNDESIRED OPERATION.

P5010M-EXT

Location of RJ-45/LED Port & IP Reset Button

The RJ-45 connector, diagnostic LEDs, and reset button are located at the bottom of the radio. Functionality of the LEDs is described later in this text. The IP reset button resets IP configuration and password back to factory default. The reset button does not reset any other parameters other than IP configuration and password. Typically a user would only press the reset button when the IP configuration or password in unknown. Reset button must be held down for approximately 10 seconds.

IP Reset Button

Trango Broadband Wireless — Atlas5010

page 9