Safety Precautions
These usage and safety guidelines are IMPORTANT! Please follow them carefully.
Your StoreJet™ 3.5 is connected to a computer using a USB
General Use
Carefully unpack the contents of the StoreJet™ package.
During operation avoid exposing your StoreJet™ to temperature extremes above 60℃, or below 5℃. Do not drop your StoreJet™.
Do not allow your StoreJet™ to become damp or wet from water or any other liquids. Do not use a damp/wet cloth to wipe or clean the exterior case.
Do not use or store your StoreJet™ in any of the listed environments:
oDirect sunlight
oNext to an air conditioner, electric heater or other heat sources o In a closed car that is in direct sunlight
Backing Up Data
Transcend does NOT take any responsibility for data loss, or damage during operation. If you decide to store data on your StoreJet™ we strongly advise that you regularly backup the data to a computer, or other storage medium.
To ensure
The StoreJet™ 3.5’s internal hard drive comes formatted for NTFS. If you want to backup a Mac computer you will need to format the drive for HFS+ using the Mac Disk Utility.
Transporting
Do not pack your StoreJet™ 3.5 into luggage without the proper padded support. Other items in the luggage may damage your StoreJet™ 3.5 without the proper protection.
Avoid squeezing your StoreJet™ 3.5 to prevent damage to the internal HDD. Avoid placing objects onto your StoreJet™ 3.5 to prevent damaging it.
Power
The StoreJet™ 3.5 is powered from the mains using the Power Adapter.
Ensure nothing is resting on the Power cables and that the cables are not located where they can be tripped over or stepped on.
Reminders
Always follow the procedures in the “Disconnecting from a Computer” section to remove your StoreJet™ from a computer.
Safety
3
