Transition Networks CGETF10XX-10X Cable Specifications, Technical Specifications, Fiber Cable

CGETF10xx-10x

Cable Specifications

The physical characteristics must meet or exceed IEEE 802.3™ specifications.

Cable Specifications -- Continued

Fiber Cable - Continued

Fiber Cable

Bit Error Rate:

Single mode fiber (recommended): Multimode fiber (recommended): Multimode fiber (optional):

CGETF1013-105

Fiber Optic Transmitter Power:

Fiber Optic Receiver Sensitivity:

Link Budget:

CGETF1014-105

Fiber-optic Transmitter Power:

Fiber-optic Receiver Sensitivity:

Link Budget:

CGETF1015-105

Fiber-optic Transmitter Power:

Fiber-optic Receiver Sensitivity:

Link Budget:

CGETF1017-105

Fiber-optic Transmitter Power:

Fiber-optic Receiver Sensitivity:

Link Budget:

CGETF1018-105

Fiber Optic Transmitter Power:

Fiber Optic Receiver Sensitivity:

Link Budget:

CGETF1024-105

Fiber-optic Transmitter Power:

Fiber-optic Receiver Sensitivity:

Link Budget:

CGETF1029-105

CGETF1029-106

Fiber-optic Transmitter Power:

Fiber-optic Receiver Sensitivity:

Link Budget:

CGETF1029-107

CGETF1029-108

Fiber-optic Transmitter Power:

Fiber-optic Receiver Sensitivity:

Link Budget:

CGETF1035-105

Fiber-optic Transmitter Power:

Fiber-optic Receiver Sensitivity:

Link Budget:

<10-9

9µm 62.5/125 µm

100/140, 85/140, 50/125 µm

850 nm multimode
min: -10.0 dBm	max: -4.0 dBm
min: -17.0 dBm	max: 0.0 dBm
7.0 dB
1310 nm single mode
min: -13.0 dBm	max: -3.0 dBm
min: -20.0 dBm	max: -3.0 dBm
7.0 dB
1310 nm single mode
min: -5.0 dBm	max: -0.0 dBm
min: -20.0 dBm	max: -3.0 dBm
15.0 dB
1550 nm single mode
min: -3.0 dBm	max: +2.0 dBm
min: -23.0 dBm	max: -3.0 dBm
20.0 dB
850 nm multimode
min: -10.0 dBm	max: -4.0 dBm
min: -17.0 dBm	max: 0.0 dBm
7.0 dB
1300 nm extended multimode
min: -10.0 dBm	max: -3.0 dBm
min: -17.0 dBm	max: -3.0 dBm
7.0 dB

1310nm TX / 1550nm RX single mode 1550nm TX / 1310nm RX single mode

min: -8.0 dBm	max: -3.0 dBm
min: -21.0 dBm	max: -3.0 dBm
13.0 dB

1310nm TX / 1550nm RX single mode 1550nm TX / 1310nm RX single mode

min: -3.0 dBm	max: +2.0 dBm
min: -23.0 dBm	max: -8.0 dBm
20.0 dB
1550 nm single mode
min: 0.0 dBm	max: +5.0 dBm
min: -27.0 dBm	max: -3.0 dBm
27.0 dB

CGETF1039-105	850 nm multimode
Fiber Optic Transmitter Power:	min: -9.0 dBm	max: -4.0 dBm
Fiber Optic Receiver Sensitivity:	min: -17.0 dBm	max: -17.0 dBm
Link Budget:	8.0 dB

Copper Cable (Category 5 -- minimum requirement)

•Gauge = 24 to 22 AWG; Attenuation = 22.0 dB /100m @ 100 MHz

•Straight-through OR crossover cable may be used.

•Shielded twisted-pair (STP) OR unshielded twisted-pair (UTP) may be used

•All pin pairs (1&2, 3&6, 4&5, 7&8) are active in a gigabit network.

•Use only dedicated wire pairs for the active pins; e.g., blue/white & white/blue, orange/white & white/orange, etc.

•Do not use flat or silver satin wire.

Technical Specifications

For Transition Networks’ Model CGETF10xx-10x or equivalent

Standards:	IEEE 802.3ab™, IEEE 802.3 2000
Data Rate / Delay:	1000 Mbs/300 nsec
Dimensions:	3.4" x 0.87" x 4.8" (86mm x 22mm x 122mm)
Weight:	3 oz. (91 g) approximate
Power Consumption:	5.4W, 450mA @ 12VDC
Packet Size:	10 Kbytes (maximum)
MTBF	381,000 hours (MIL217F2 V5.0) (MIL-HDBK-217F)
	1,344,000 hours (Bellcore7 V5.0)
Operating Temp:	Tmar* 0°C to 50°C (32°F to 122°F)*
Storage Temp:	-15°C to 65°C (5°F to 149°F)
Humidity:	10% to 90%, non condensing
Altitude:	0 to 10,000 feet
Warranty:	Lifetime

*Manufacturer’s rated ambient temperature. “Tmra” range for this slide-in-module depends on the physical characteristics and the installation configuration of the Transition Networks PointSystem™ chassis in which this slide-in-module will be installed.

The information contained in this user’s guide is subject to change. For the most up-to-date information on the CGETF10xx-10x media converter, view the user’s guide on-line at: www.transition.com.

CAUTION: Visible and invisible laser radiation when open. Do not stare into beam or view directly with optical instruments.

CAUTION: Use of controls, adjustments or the performance of procedures other than those specified herein may result in hazardous radiation exposure.

The fiber optic transmitters on this device meet Class I Laser safety requirements per IEC- 825/CDRH standards and comply with 21 CFR1040.10 and 21CFR1040.11.

8 24-hour Technical Support: 1-800-260-1312 International: 00-1-952-941-7600 techsupport@transition.com -- Click the “Transition Now” link for a live Web chat. 9