Transition Networks CSRFB10XX-100 specifications User’s Guide, CSRFB10xx-100

User’s Guide

CSRFB10xx-100

Slide-in-Module Media Converter

•Copper to Fiber

•10/100 Bridging (2-Port)

•10Base-T/100Base-TX to 100Base-FX

The CSRFB10xx-100, 2-port Ethernet/Fast Ethernet bridging media converter is designed to be installed in a Transition Networks PointSystem™ chassis. This converter connects 10Base-T Ethernet or 100Base-TX Fast Ethernet twisted-pair copper network converters

to network converters on a 100Base-FX Fast Ethernet fiber network. The CSRFB includes a status reporting feature for viewing operational parameters only from its remotely attached CSRFB converter via the fiber connection.

Part Number	Port One - Copper	Port Two - Duplex Fiber-Optic
	10Base-T/100Base-TX 100Base-FX
	RJ-45	ST, 1310nm multimode
CSRFB1011-100
	100 m (328 ft)*	2 km (1.2 miles)*
	RJ-45	SC, 1310 nm multimode
CSRFB1013-100
	100 m (328 ft)*	2 km (1.2 miles)
	RJ-45	SC, 1310 nm single mode
CSRFB1014-100
	100 m (328 ft)*	20 km (12.4 miles)
	RJ-45
CSRFB1040-100		SFP Empty Slot
	100 m (328 ft)*
	RJ-45	SC, 1310nmTX/1550nmRX
CSRFB1029-100
	100 m (328 ft)*	20km (12.4 miles)
	RJ-45	SC, 1550nmTX/1310nmRX
CSRFB1029-101
	100 m (328 ft)*	20km (12.4 miles)
	RJ-45	SC, 1310nmTX/1550nmRX
CSRFB1029-102
	100 m (328 ft)*	40km (24.9 miles)
	RJ-45	SC, 1550nmTX/1310nmRX
CSRFB1029-103
	100 m (328 ft)*	40km (24.9 miles)
	Install CSRFB1029-100/101 and CSRFB1029-102/103 single-
	fiber optic in the same network where one is the local (center)
	converter and the other is the remote (terminal) converter.
		Installation	.2
		Operation	.7
		Cable Specifications	11
		Technical Specifications	12
		Troubleshooting	13
		Contact Us	15
		Compliance Information	16