CAUTION: RJ connectors are NOT INTENDED FOR CONNECTION TO THE PUBLIC TELEPHONE NETWORK. Failure to observe this caution could result in damage to the public telephone network.
Der Anschluss dieses Gerätes an ein öffentlickes Telekommunikationsnetz in den
Compliance Information
UL Listed
CISPR/EN55022 Class A
FCC Regulations
This equipment has been tested and found to comply with the limits for a class A digital device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference, in which case the user will be required to correct the interference at the user’s own expense.
Canadian Regulations
This digital apparatus does not exceed the Class A limits for radio noise for digital apparatus set out on the radio interference regulations of the Canadian Department of Communications.
European Regulations
Warning
This is a Class A product. In a domestic environment this product may cause radio interference in which case the user may be required to take adequate measures.
Copyright Restrictions
© 1997 TRANSITION Networks
All rights reserved. No part of this work may be reproduced or used in any form or by any means – graphic, electronic, or mechanical – without written permission from TRANSITION Networks.
Trademark Notice
All registered trademarks and trademarks are the property of their respective owners.
100BASE-FX Cable and Connector Specifications
The physical characteristics of the
100BASE-FX CABLE SPECIFICATIONS
Fiber Optic Cable Recommended: | 62.5 / 125 µm multimode fiber |
Optional: | 100 / 140 µm multimode fiber |
| 85 / 125 µm multimode fiber |
| 50 / 125 µm multimode fiber |
Fiber Optic Transmitter Power: |
|
Average power: | |
Fiber Optic Receiver Sensitivity: |
|
Average sensitivity: | |
Bit error rate: | ≤ |
Maximum Cable Distance
| |
Collision Domain: | 412 meters (1375 feet) |
2000 meters (6500 feet) |
100BASE-FX CONNECTOR CHARACTERISTICS:
One (1) transmit and one (1) receive ST connector.
Transition Networks’ | Pocket Switch | 28 |
