Transition Networks E-PSW-TX-02 Operation, Connectors, Switches, and Indicators, LED Indicators

4. OPERATION

The Transition Networks’ pocket switch requires no operator intervention beyond occasionally monitoring LED status indicators.

	Power LED Indicator			Port 2 LED Indicators
			Port 1 LED Indicators
POWER		Steady green LED indicates connection to external
		AC power.

NOTE: The port LED indicators provide separate data for each port.

100 (MB/S)	Steady green LED indicates that port transmits and
	receives at 100 Mb/s.
L(INK)	Steady green LED indicates port link connection is
	active.
H(ALF) D(UPLEX)	Steady green LED indicates port sends and
	receives data simultaneously over same cable.
R(ECEIVE)	Blinking green LED indicates port is receiving data.

Connectors, Switches, and Indicators

Port 1 100BASE-FX Connector

Port 1 10BASE-T/100BASE-TX Connector

Port 2 10BASE-T/100BASE-TX Connector

Power LED Indicator		Port 2 LED Indicators
		Port 1 LED Indicators
Connectors
ON PORT 1	One (1) 10/100Mb/s RJ-45 twisted-pair connector
	AND (E-PSW-FX-02 only) one (1) 100Mb/s ST fiber
	connector pair
ON PORT 2	One (1) 10/100Mb/s RJ-45 twisted-pair connector
LED Indicators
POWER	Steady green LED indicates connection to external
	AC power.

NOTE: The port LED indicators provide separate data for each port.

100 (MB/S)	Steady green LED indicates that port transmits and
	receives at 100 Mb/s; dark LED indicates 10 Mb/s.
L(INK)	Steady green LED indicates active port link
	connection.
H(ALF) D(UPLEX)	Steady green LED indicates half-duplex mode;
	dark LED indicates full-duplex mode.
R(ECEIVE)	Blinking green LED indicates port is receiving
	data.

Switches (at surface opposite connectors)

DIP	Allows selection, for each port, of operating speed
	and mode or selection of Auto-Negotiation.
RESET	Resets hardware to initial operating condition.

23 Transition Networks’ Pocket Switch 4