Transition Networks SISTF10xx-130-LR(T) specifications Technical Specifications, Warranty

SISTF10xx-130-LR(T)

Technical Specifications

For use with Transition Networks Model SISTF10xx-130-LR(T) or equivalent

Standards: IEEE 802.3™, 802.3u™; 802.3x™

Data Rate: 10 Mb/s, 100 Mb/s (copper); 100 Mb/s (fiber)

Processing Type: Store and Forward

w/ IEEE802.3x™ full-duplex, non-blocking flow control

Dimensions: 1.8" x 5.3" x 4.1" (46 mm x 135 mm x 105 mm)

Weight:1.4 lb. (0.65 kg) (approximate)

Input Power: 12-48VDC, 0.2-0.7A, 24W (minimum), (redundant inputs) with overload and reverse polarity protection

Address Table Size: 1,000 Unicast Mac addresses

Alarm Relay: 1 Amp @ 24 VDC

Mechanical: Ingress Protection: IP30

Environment: Tmra* (standard temp): 0 to 60°C (32 to 140°F) Tmra* (extended temp): -40 to 75°C (-40 to 167°F)

	Storage Temperature:	-40 to 85°C (-40 to 185°F)
	Humidity:	5 to 95%, non condensing
Warranty:	Lifetime

*Manufacturer’s rated ambient temperature.

The information contained in this user’s guide is subject to change. For the most up-to-date information see the user’s guide on line at: www.transition.com.

CAUTION: This device is intended to be supplied by a listed power unit marked LPS or Limited Power Source, provided with a connector for field wiring terminal, and output rated 12-48VDC, 0.2-0.7 A, 24 W minimum.

CAUTION: This device is designed for operation with a safety extra-low voltage (SELV) in compliance with IEC950 / EN60950 / VDE0805 and in compliance with the low voltage directive 73/23/EEC and 93/68/EEC.

This device is certified by the manufacturer to comply with DHHS Rule 21/CFR, Subchapter J applicable at the date of manufacture.

CAUTION: Visible and invisible laser radiation when open. Do not stare into beam or view directly with optical instruments.

CAUTION: Use of controls, adjustments or the performance of procedures other than those specified herein may result in hazardous radiation exposure

Technical Specifications -- Continued

EMS Type Tests

Test	Description		Test Levels	Severity
IEC61000-4-2	ESD	Air discharge	+/- 8 KV	3
		Contact discharge	+/- 6 KV	3
		ESD contact discharge	+/- 6 KV	3
IEC61000-4-3	Radiated RFI	Housing	10V/m, 80 MHz - 1 GHz	3
			AM 1 KHz, 80% mod
			10 V/m, 0.9 - 1.8 GHz
			FM 200 Hz 50% square
IEC61000-4-4	Burst	Power supply lines	+/- 2 KV	3
	(Fast Transient)
		Communication lines	+/- 1 KV	3
		Relay	+/- 1 KV	3
IEC61000-4-5	Surge	Power supply lines	+/- 2 KV, 12 Ω, CM	3
			+/- 1 KV, 2 Ω, DM
		Relay	+/- 2 KV, 12 Ω, CM	3
			+/- 1 KV, 2 Ω, DM
IEC61000-4-6	Induced	Power supply lines	10 Vrms, 150-80 MHz	3
	(Conducted RFI)		AM 1 KHz, 80% mod
		Communication lines	10 Vrms, 150-80 MHz	3
			AM 1 KHz, 80% mod
		Relay	10 Vrms, 150-80 MHz	3
			AM 1 KHz, 80% mod

Environmental Type Tests

Test	Description	Test Levels
IEC 60068-2-6	Vibration	10 - 500 - 10 Hz, 0.5 oct./min, 4g, X, Y, Z (3 axes)
IEC 60068-2-27	Shock	50 g, 11 ms, +/-X, +/-Y, +/- Z (6 direction)
IEC 60068-2-32	Free fall	75 cm, 1 corner, 3 edges, 6 faces (total 10 drops)

12 24-hour Technical Support: 1-800-260-1312-- International: 00-1-952-941-7600 techsupport@transition.com -- Click the “Transition Now” link for a live Web chat. 13