Transition Networks SSDTF1013-100 SSDTF10xx IN THE NETWORK, Technical Specifications, Features

SSDTF10xx IN THE NETWORK

NOTE: THE SSDTF10xx REQUIRES A CSU BETWEEN THE MEDIA CONVERTER AND THE PUBLIC TELEPHONE NETWORK.

T1 Network Extension

CSU

NOTE: T1/E1 MEDIA CONVERTERS MUST BE USED IN PAIRS. A TRANSITION Networks SSDTF10xx stand-alone media converter can be used with another SSDTF10xx stand-alone media converter, with a CSDTF10xx chassis media converter, or with a previous model TRANSITION Networks T1/E1 media converter, such as a C/T1E1-CF-01 or a T1E1-CF-01.

Features

•Media converter is framing independent (as ESF vs D4) and supports all common line codes, (AMI, B8ZS, HDB3).

•Dry relay contacts allow media converter to be tied into separate alarm circuit

•All Ones Insertion (AIS) on loss of signal at copper and/or fiber interface.

TECHNICAL SPECIFICATIONS

Standards	Emissions: CISPR A
	T1/E1 Physical Layer: ITU-T, ANSI, AT&T, ETSI
Dimensions	2.9" x 4.8" x 1.4"
Weight	8 oz (approximate)
Power Source	7.5-15.9 VDC AC Adapter
Power Consumption	5 watts

Power Supply Requirements Replace power supply with only the equivalent input rating (see below) and output rating (regulated 9VDC at 550 mA).

TN PN	Requirement	Location
25034 or 3525 240 volts, 50 hertz		United Kingdom
25034 or 3525 230 volts, 50 hertz		Europe
3518	120 volts, 60 hertz	USA/Canada/Mexico
3514	100 volts, 50-60 hertz	Japan
25034 or 3525 240 volts, 50 hertz		Australia
Environment	Typical Operating Temperature*: 0° to 50°C (32° to 122°F )
	Storage Temperature:	-20° to 85°C (-4° to 185°F)
	Humidity	10-90%, non condensing
	Altitude	0-10,000 feet
Warranty	Lifetime

		DECLARATION OF CONFORMITY
Name of Mfg:	Transition Networks
	6475 City West Parkway, Minneapolis MN 55344 USA

Model:SSDTF10xx Series Copper-to-Fiber Media Converter

Part Number: SSDTF1011-100, SSDTF1012-100, SSDTF1013-100,

SSDTF1022-100

Regulation: EMC Directive 89/336/EEC

Purpose: To declare that the SSDTF10xx to which this declaration refers is in conformity with the following standards.

EN 55022:1994; EN 55024:1998; FCC Part 15 Class A; EN 60950 A4:1997; UL 1950

I, the undersigned, hereby declare that the equipment specified above conforms to the above Directive(s) and Standard(s).

	_January 8, 2001_____
Stephen Anderson, Vice-President of Engineering	Date