Construction, Hardware and Insulation
Cabinet exterior front, one piece sides, louver assembly and doors are constructed of 20 gauge stainless steel with #4 finish. Cabinet interior and door liners are constructed of stainless steel. The exterior cabinet top, back and bottom are constructed of heavy gauge aluminized steel. A set of four (4) adjustable 6" high stainless steel legs are included.
Doors are equipped with a gasket protecting metal door pan, removable plug cylinder locks and guaranteed for life cam-lift, gravity action, self-closing metal, glide hinges with stay open feature at 120 degrees. Hinges include a concealed switch to automatically activate the interior incandescent lighting. Guaranteed for life, work flow door handles are mounted horizontally over recess in door which limits protrusion from door face into aisleways. Doors have seamless, polished metal corners.
Easily removable for cleaning, vinyl magnetic door gasket assures tight door seal. Anti condensate heaters are located behind each door opening.
Both the cabinet and door(s) are insulated with an average of 2" thick high density, non-CFC, foamed in place polyurethane.
DIMENSIONAL DATA | RFF132WUT | RFF232WUT | RFF332NUT |
Net capacity cu. ft. | 24.2 (686 cu l) | 51.6 (1462 cu l) | 69.5 (1969 cu l) |
Length - overall in. | 297⁄8 (75.9 cm) | 58 (147.3 cm) | 765⁄16 (193.8 cm) |
Depth - overall in. | 35 (88.8 cm) | 35 (88.8 cm) | 35 (88.8 cm) |
| | | |
Depth - over body in. | 32 (81.3 cm) | 32 (81.3 cm) | 32 (81.3 cm) |
| | | |
Depth - with door open | 5711⁄16 (146.5 cm) | 5711⁄16 (146.5 cm) | 553⁄4 (141.6 cm) |
90 degrees in. | | | |
| | | |
Clear door width in. | 211⁄8 (53.6 cm) | 211⁄8 (53.6 cm) | 211⁄8 (53.6 cm) |
Clear half-door height in. | 271⁄2 (69.9 cm) | 271⁄2 (69.9 cm) | 271⁄2 (69.9 cm) |
Clear full-door height in. | 575⁄8 (146.3 cm) | 575⁄8 (146.3 cm) | 575⁄8 (146.3 cm) |
Height - overall on 6" legs | 831⁄4 (211.5 cm) | 831⁄4 (211.5 cm) | 831⁄4 (211.5 cm) |
Shelf area sq. ft. | 18.8 (1.75 sq m) | 37.6 (3.49 sq m) | 51.9 (4.82 sq m) |
Net Wt. lbs. | 415 (188 kg) | 705 (320 kg) | 870 (395 kg) |
ELECTRICAL DATA | | | |
| | | |
Voltage | 208/115/60/1 | 208/115/60/1 | 208/115/60/1 |
| | | |
Feed wires with Ground | 4 | 4 | 4 |
| | | |
Full load amperes | 8.8 | 22.0 | 22.0 |
| | | |
Wattage1 | 1830 | 2928 | 2928 |
REFRIGERATION DATA | | | |
Refrigerant | R-404A | R-404A | R-404A |
BTU/HR H.P.2 | 4130 (1 HP) | 2 x 8260 (1 HP) | 2 x 8260 (1 HP) |
NOTES
NOTE: Figures in parentheses reflect metric equivalents.
1=Wattage is determined by listed amps X listed volts X an average run time of 70% for refrigerators and 80% for freezers.
2=Based on a 90 degree F ambient and -20 degree F evaporator.
3=For approximate remote weights deduct 40 lbs. from respective net or gross weight. For other information on remote models, please refer to spec sheet 12-2.
Refrigeration System
A top mounted, self-contained, balanced refrigeration system using R-404A refriger- ant is conveniently located behind the one-piece louver assembly. It features large, high humidity, interior mounted evaporator coils, coated with a plastic to retard corro- sion, bottom mounted electric condensate evaporator, and an automatic preset time activated electric defrost. A cord and plug is supplied standard on one section mod- els only. Standard operating temperature is -20°F.
Controller
The easy to use water resistant INTELA-TRAUL®microprocessor control system is supplied standard. Unit is NAFEM Data Protocol communication (NDP) ready. Optional hardware required to be NDP compliant. Third party software required for network connection. It includes a 3-Digit LED Display, Fahrenheit or Celsius Temperature Scale Display Capability, Defrost Lockout Feature and an RS485 data port. In addition it includes audio/visual alarms for: Hi/Lo Cabinet Temperature, Door Open, Clean Condenser, Evaporator Coil and Discharge Line Sensor Failures, and Power Supply Interruption.
Interior
Standard interior arrangements include three (3) chrome plated wire shelves per section, mounted on shelf pins. Shelves are full-width, and do not have any large gaps between them requiring the use of "bridge" or "junior shelves." Recommended load limit per shelf should not exceed 225 lbs. Optional tray slides may be purchased in combination with, or in lieu of these. Both standard and optional interior arrangements are completely installed at the factory.
Warranties
Both a one year parts and labor warranty and a five year compressor warranty (self- contained models only) are provided standard. An optional 2nd year extended parts and labor warranty is also available. In addition the INTELA-TRAUL®control is warranted by a two year parts and labor warranty.
FAST FREEZING NOTES:
For best results, it is recommended that loading be held to a minimum with more frequent use of the freezing process made. Depending on the product variables of type, size and placement, together with the desired quantity, the time necessary for freezing will be determined.
Three factors: air temperature, air movement and refrigeration capacity, all combine to provide fast freezing. A fourth factor is also important. This is the combined effects of product type, size, quantity and placement. The smaller the product size and quantity, the faster will its freezing be accomplished. The placement of product with adequate spacing also assures faster freezing by allowing freer movement of air around it.
Equipped With One NEMA L14-20P Plug (one section model only)
Full load amps and plug style may vary depending on electrical options
chosen and condensing unit employed.
REQUIRED CLEARANCES
In order to assure optimum performance, the condensing unit MUST have an adequate supply of air for cooling purposes. Therefore, the operating location must either have a minimum of 12” clearance overhead of the condensing unit or allow for unrestricted air flow at the back of the unit. Clearance of at least 12” above is required in order to perform certain maintenance tasks.
