Traulsen UPT276-R, UPT276-L, UPT279-R warranty Specifications, Construction, Hardware and Insulation

Project	Quantity	Item #
Model Specified:		CSI Section 11400

Specifications

Construction, Hardware and Insulation

Cabinet exterior front, one piece sides, and doors are constructed of 22 gauge stainless steel. Cabinet interior and door liners are constructed of anodized aluminum. The exterior cabinet back and bottom are constructed of galvanized steel.

A stainless steel door with a recessed work-flow handle and anodized aluminum liner is provided. The door self closes at less than 90 degrees and also includes a stay open feature at 105 degrees. Easily removable for cleaning, vinyl magnetic door gasket assures tight door seal.

Both the cabinet and door(s) are insulated with an average of 2" thick high density, non-CFC, foamed in place polyurethane.

A full length reversible nylon cutting board, 12" wide (for model UPT276) or 8" wide (for model UPT279) is supplied standard.

Pans & Cover

Each model is supplied standard with its full compliment of 4" deep plastic 1/6 size pans and stainless steel pan dividers. The insulated pivoting pan cover is constructed of stainless steel, and is removable for cleaning.

Refrigeration System

A balanced, rear mounted, front breathing, self-contained refrigeration system using R-134a refrigerant is provided. It features a capillary tube metering device, air-cooled hermetic compressor, a forced air evaporator coil and a non-electric condensate evaporator. An 8' cord and plug is provided. Standard operating temperature is 34 to 38°F.

Interior

Standard interior arrangements include two (2) powder coated wire shelves per door, mounted on pilasters. These are adjustable in 1/2" increments, allowing for a mini- mum of 1-1/2"spacing between shelves.

Warranties

Both a one year parts and labor warranty and a five year compressor warranty (self- contained models only) are provided standard. An optional 2nd year extended parts and labor warranty is also available.

DIMENSIONAL DATA	UPT276	UPT279
Net capacity cu. ft.	7.1	7.1
Length - overall in.	27	27
Depth - overall in.1	333⁄8	333⁄8
Depth - with door open 90°	545⁄8	543⁄8
Clear door height in.	241⁄8	241⁄8
Clear door width in.	223⁄4	223⁄4
Height - overall on 6" legs in.	443⁄4	46
Number of shelves - total	2	2
Shelf area sq. ft.	4.88	4.88
Pan Capacity - 1/6 Size	6	9
ELECTRICAL DATA
Voltage	115/60/1	115/60/1
Full Load Amperes	4.5	4.5
Wattage	345	345
REFRIGERATION DATA
Refrigerant	R-134a	R-134a
BTU/HR - H.P.2	1020 (1⁄5 HP)	1020 (1⁄5 HP)
SHIPPING DATA
Length - Crated in.	44	44
Depth - Crated in.	441⁄4	441⁄4
Height - Crated in.	463⁄4	463⁄4
Volume - Crated cu. ft.	53	53
Net Wt. lbs.	270	270
Gross Wt. lbs.	280	280

NOTE: When ordering please specify: Voltage, Hinging, Optional Accessories and any additional warranties.

Continued product development may necessitate specification changes without notice. Part No. TR35821 (revised 1/07)

NOTES

1= Overall depth figure includes standard cutting board.

2= Based on a 90 degree F ambient and 20 degree F evaporator.

Equipped With One NEMA 5-15 P Plug

SECTION	TRAULSEN
	4401 BLUE MOUND RD.	FT. WORTH, TX 76106
9-3	PHONE 1 (800) 825-8220	FAX-MKTG. 1 (817) 624-4302

Website: www.traulsen.com