Introduction
This manual is provided by Powermatic Inc. covering the safe operation and maintenance procedures for a Powermatic Model PJ1696 Jointer. This manual contains instructions on installation, safety precautions, general operating procedures, maintenance instructions and parts breakdown. This machine has been designed and constructed to provide years of trouble free operation if used in accordance with instructions set forth in this manual. If there are any questions or comments, please contact either your local supplier or Powermatic. Powermatic can also be reached at our web site: www.powermatic.com.
Specifications
Model No | PJ1696 |
Stock No | 1791283 |
Motor | |
Maximum width cutting capacity | 16" (406 mm) |
Maximum depth cutting capacity | 3/4" (19 mm) |
Cuts per minute | 20,800 |
Table size | 16" W x 96" L (406mm x 2438 mm) |
Table height from floor | |
Fence size | |
Fence tilt | 45 degrees forward, 45 degrees backward |
Positive stops | 45 deg., 90 deg., 135 deg. |
Cutterhead speed | 5200 RPM |
Number of knife inserts | 56 standard, 2 rabbet |
Cutterhead diameter | 4" (98 mm) |
Rabbeting capacity | 3/4" (19 mm) |
Dust connection diameter | 6" (152 mm) |
Overall dimension | 46" L x 96" W x 43" H (1168 x 2438 x 1092 mm) |
Packing dimension | 39" L x 102" W x |
Net weight | 1280 lbs. (582 kgs.) |
Gross weight | 1400 lbs. (636 kgs.) |
*
The above specifications were current at the time this manual was published, but because of our policy of continuous improvement, Powermatic reserves the right to change specifications at any time and without prior notice, without incurring obligations.
8
