Chapter 2

Unpacking

2.1Opening the Delivery Package

The HS-6038 is packed in an anti-static bag. The board has components that are easily damaged by static electricity. Do not remove the anti-static wrapping until proper precautions have been taken. Safety Instructions in front of this manual describe anti-static precautions and procedures.

2.2Inspection

After unpacking the board, place it on a raised surface and carefully inspect the board for any damage that might have occurred during shipment. Ground the board and exercise extreme care to prevent damage to the board from static electricity.

Integrated circuits will sometimes come out of their sockets during shipment. Examine all integrated circuits, particularly the BIOS, processor, memory modules, ROM-Disk, and keyboard controller chip to ensure that they are firmly seated. The HS-6038 delivery package contains the following items:

HS-6038 Industrial Single Board Computer ATA/100 IDE flat cable x 2FDD flat cable x 1Printer cable with bracket x 1 KB/MS transfer cable x 1

8-pin USB split type cable with bracket x 1 Speaker connector flat cable with bracket x 1 Two RS-232 cable with bracket x 1

5-pin ATX cable x 1 Jumper Bag Utility CD-ROM User’s Manual

5