DiskOnChip

Pin 1Location

4.The installation is now complete and your module is now ready for use.

NOTE: If you encounter difficulty installing your DiskOnChipmodule, please consult a qualified technician or engineer to perform the installation.

3.26.2 Removing DiskOnChipModules

When removing a DiskOnChipmodule from its socket, please take note of the following:

1.Loosen the contact of the module from its socket using a screwdriver.

2.Insert the screwdriver’s flat head into a gap on either end of the socket. Do not insert the screwdriver head on either side where the pins are located. Doing so might damage the pins in the process.

3.Slowly lift the screwdriver handle upwards. This will disengage the module from its socket.

NOTE: If you encounter difficulty removing your DiskOnChipmodule, please consult a qualified technician or engineer to remove it for you.

26