3
operate. The soft switch on the front panel can be used to turn the unit on and
off. The unit has an AC to DC power transformer built into its power cable. The
AC end of the power cable plugs into a standard 120V AC outlet. The DC end of
cable connects to the power jack on the rear panel of the base unit.
Neither of the Bluetooth transmitters requires a separate power connection.
There are two USB ports on the front of the unit and one on the rear of the unit.
Any available USB port can be used for the AIRcable Bluetooth transmitter’s
USB cable. For the TRENDnet Bluetooth transmitter, a USB port should be
chosen so that the transmitter‘s built in antenna can be extended vertically.
The BlueFlyers unit is shipped with a demonstration advertisement installed, but
must be configured to transmit the desired advertisement flyer. Files are
transferred to BlueFlyers via the provided USB flash drive. The USB flash drive
can be plugged into any available USB port on the base unit.